Diameter to: 125,0 mm. 1x MAPCO 19648 tie rod end.Inner thread: M14x2,0 mm. Outer thread: M10x1,5 mm. Cone Size: 13,0 mm.
2x MAPCO 33644 Stabiliser Mounting. Fitting Position: Front Axle left and right. 2x MAPCO 19604HPS Rod/Strut, stabiliser.1x MAPCO 19649 tie rod end. Fitting Position: Front Axle Right. 2x MAPCO 19650 inner tie rod end. Outer thread: M14x1,5 mm. 1x MAPCO 19652 control arm. 2x MAPCO 17600 Bellow, steering. Fitting Position: Left and right.
MAPCO 54619 Support Frame, engine carrier. MAPCO 19648 tie rod end. MAPCO 19649 tie rod end. MAPCO 19650 inner tie rod end.
Please be sure to check the compatibility and mind the important part details notes, if any. FORD FOCUS (DAW, DBW) 1.6 16V. FORD FOCUS (DAW, DBW) 1.8 16V. FORD FOCUS (DAW, DBW) 1.8 DI / TDDi. FORD FOCUS (DAW, DBW) 1.8 TDCi.FORD FOCUS (DAW, DBW) 1.8 Turbo DI / TDDi. FORD FOCUS (DAW, DBW) 2.0 16V.
FORD FOCUS (DAW, DBW) ST170. FORD FOCUS Saloon (DFW) 1.4 16V. FORD FOCUS Saloon (DFW) 1.6 16V. FORD FOCUS Saloon (DFW) 1.8 16V.FORD FOCUS Saloon (DFW) 1.8 TDCi. FORD FOCUS Saloon (DFW) 1.8 Turbo DI / TDDi.
FORD FOCUS Saloon (DFW) 2.0 16V. FORD FOCUS Turnier (DNW) 1.4 16V.FORD FOCUS Turnier (DNW) 1.6 16V. FORD FOCUS Turnier (DNW) 1.8 16V. FORD FOCUS Turnier (DNW) 1.8 DI / TDDi.
FORD FOCUS Turnier (DNW) 1.8 TDCi. FORD FOCUS Turnier (DNW) 1.8 Turbo DI / TDDi. FORD FOCUS Turnier (DNW) 2.0 16V. FORD FOCUS Turnier (DNW) ST170. OEM numbers are for comparison purposes only.Installation of the products must be done by a qualified service professional. All product photos are original photos of the items and are property of MAPCO Autotechnik LTD.
Account No: 63742652 Sort code: 20-37-13. Carriage forward for logistical reasons is not accepted and will be send back to the sender at his charge. Over the last 40 years millions of MAPCO products have been fitted to a multitude of different vehicle applications.
Originally founded as a PLC in France, the company now coordinates its entire activities as MAPCO Autotechnik GmbH from its headquarters in Borkheide, near Berlin. MAPCO has made itself a name in the last three decades all over Europe as a brake specialist. Although the total sales programme for other automotive replacement parts has been dramatically extended during this period, MAPCO has not neglected its original specialism and has continually developed and enhanced its range of brake parts. MAPCO steering and suspension parts have been available to the German market since 1985. However the programme entered its most dynamic growth phase, leading up to the impressive dimensions which have now been reached, from 1995 onwards.
The new technologies for front and rear axle constructions introduced by the vehicle manufacturers in the Nineties, has lead led to an explosive growth in the market potential for these replacement parts. Far in excess of 3500 individual items are carried in this product group. The corresponding catalogue with original photos and illustrations is clearly presented and practice-oriented.
The quality, price and availability of these parts set new standards in the marketplace. MAPCO steering racks for servo-assisted and mechanical steering round off the programme. Once again the automotive industry's sustained policy in the Nineties, aimed at increasing the comfort and safety of cars, has created a completely new replacement parts market. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Steering & Suspension\Control Arms, Ball Joints & Assemblies". The seller is "mapco-uk" and is located in this country: GB.
This item can be shipped worldwide.