Control Kit Complete

Complete self-supporting gate automation kit PNI AP800C

Complete self-supporting gate automation kit PNI AP800C
Complete self-supporting gate automation kit PNI AP800C
Complete self-supporting gate automation kit PNI AP800C
Complete self-supporting gate automation kit PNI AP800C
Complete self-supporting gate automation kit PNI AP800C
Complete self-supporting gate automation kit PNI AP800C
Complete self-supporting gate automation kit PNI AP800C
Complete self-supporting gate automation kit PNI AP800C
Complete self-supporting gate automation kit PNI AP800C

Complete self-supporting gate automation kit PNI AP800C
The self-supporting gate opening automation kit is equipped with a 350W motor that can open or close gates with a maximum weight of 800 kg. The PNI AP800C gate automation kit includes all the components necessary for the commissioning of a practical access control system: motor, warning lamp, two photocells, 6 meters of rack, wheel kit and mounting accessories kit. The gate can be opened and closed from the remote control or other access control devices such as access buttons or access keyboards can be connected to the system. To avoid accidents, two levels of sensitivity can be set: high and low. If the gate is closing or opening and encounters an obstacle, the engine will stop. You can also program slow start and stop at the end of the race. You can program the gate to close automatically after a certain number of seconds (10, 30 or 60). You can also program the condominium mode that allows simultaneous control over multiple access devices. In condominium mode, when the gate is open, if you press the buttons on the remote control or another connected access terminal (access button or access keypad), they will not work until the gate is fully open.

When the gate is closed, if you press the buttons on the remote control or on another connected access terminal, the gate will stop and open completely allowing access. Automation kit PNI AP800C self supporting gates UK. Video will open in a new window. This item is in the category "Home, Furniture & DIY\DIY Materials\Garage Doors & Openers\Opener Systems".

The seller is "www.pni.ro" and is located in this country: RO. This item can be shipped to all countries in Europe.
  • Horse Power: 3/4 HP
  • Model: PNI-AP600C
  • Maximum Gate Weight: 1300 kg
  • Maximum Door Size: 4-5m
  • Maximum Gate Size: 4-5m
  • Smart Home Compatibility: Remote control
  • Power Source: 230V
  • Type: Gate Opener
  • Smart Home Protocol: Remote control
  • Maximum Door Weight: 800 kg
  • MPN: PNI-AP600C
  • Brand: PNI
  • Manufacturer Warranty: 2 Years
  • Application: Resindential
  • Voltage: 230 V
  • EAN: 5949066519000

Complete self-supporting gate automation kit PNI AP800C